Commercial Irrigation Installation for Multi-Site Properties

Case designs and installs commercial irrigation systems for regional and national property portfolios, office parks, retail chains, healthcare networks, industrial facilities, and institutional campuses.

When you are managing 40, 100, or 500 commercial properties, your irrigation partner needs to perform consistently at every site, not just the flagship location.

Locations Serviced

10000 +

Service Partner Network

10000 +

Trucks and Equipment

0 +

What Happens When Irrigation Fails Across a Multi-Site Portfolio

A single sprinkler malfunction at one property is a nuisance. The same failure repeated across 80 locations is a liability.

Commercial property portfolios routinely experience:

Aging systems that were installed for residential-grade demand and cannot handle commercial water pressure, coverage requirements, or runtime loads.

Inconsistent coverage causing visible dry patches, dead turf, and tenant complaints.

Water waste from outdated controllers, broken heads, and unchecked run times, driving water bills higher without improving property appearance.

Deferred maintenance that converts a $3,000 repair opportunity into a $45,000 full system replacement.

Compliance exposure from missing backflow prevention certifications, unreported water usage, and non-compliant municipal connections.

Case installs commercial-grade irrigation systems built to deliver consistent performance, measurable water efficiency, and minimal ongoing intervention, across every location you manage.

Commercial Irrigation Installation for Every Property Type

Case works with organizations managing large commercial property portfolios. Whether you oversee 40 suburban office parks or 300 national retail locations, the installation process, reporting structure, and service standards remain consistent across every site.

Office Parks and Commercial Real Estate Portfolios

Facility directors and property management companies trust Case to install irrigation systems that keep commercial grounds presentable without adding workload to internal maintenance teams. We design systems around your site layout, water source, and coverage requirements, and deliver a completed installation with documentation your ownership group can file alongside the property record.

Common project profile: Multi-building office campus, 5-25 acres, centralized irrigation controller with per-zone scheduling, flow monitoring, and seasonal shutdown/startup service.

National Retail Chains and Shopping Centres

When your retail portfolio spans dozens or hundreds of locations, vendor consolidation matters. Managing separate irrigation contractors across 15 regional markets creates inconsistent standards, fragmented invoicing, and no centralized reporting. Case installs and maintains irrigation systems at multi-location retail properties under a single master service agreement, with standardized installation specifications, consistent materials, and one point of contact for your national accounts team.

Common project profile: Strip mall or big-box anchored centre, standardized planting bed drip installation, perimeter turf spray coverage, and controller integration with existing property management systems.

Healthcare Systems and Medical Office Networks

Healthcare campuses have specific requirements, patient access must be maintained at all times, water features near building entrances must meet sanitation standards, and any ground disruption must be coordinated with facilities operations. We install irrigation systems at hospitals, medical office buildings, and healthcare campuses with minimal disruption to patient flow and full compliance documentation provided upon project completion.

Common project profile: Multi-building healthcare campus, phased installation to maintain access, backflow prevention certification, and integration with grounds maintenance program.

Industrial Parks, Distribution Centres, and Logistics Facilities

Industrial facilities often have minimal landscaping relative to total site footprint, but the landscaping that exists, entry corridors, perimeter buffers, detention pond surroundings, needs reliable irrigation to stay compliant with local property maintenance codes and lease terms. Case installs durable, low-maintenance systems appropriate for industrial environments, with controller placement designed to accommodate the demands of high-traffic logistics operations.

Common project profile: Distribution centre entry corridor and perimeter green space, rotor-based coverage, automated scheduling, and annual maintenance contract.

Universities, School Districts, and Institutional Campuses

Educational campuses present large, varied irrigation requirements, athletic fields, courtyard plantings, entry landscapes, and open green space often require different system types managed through a single central controller. Case designs and installs campus irrigation systems with full central control capability, allowing grounds staff to monitor and adjust all zones from one platform without managing multiple contractor relationships.

Common project profile: Mid-size university campus, zone-specific head selection for turf vs. planting beds, weather-based ET controller integration, and training program for internal grounds team.

Municipal Properties and Public Parks

Government facilities operate under procurement requirements that most commercial contractors are not equipped to navigate. Case has experience working within formal public-sector bidding processes, providing the documentation, compliance certifications, and bond capacity that municipal buyers require.

Common project profile: Municipal park system covering 8-12 sites, high-capacity rotor coverage for athletic fields, flow monitoring with water usage reporting, and multi-year maintenance and winterization contract.

Commercial Irrigation Installation: From Site Assessment to System Handoff

Every Case irrigation installation follows a structured process designed to remove uncertainty from a high-stakes infrastructure decision.

Free Commercial Site Assessment

A Case irrigation specialist visits your property, or coordinates a multi-site assessment across your portfolio, to evaluate existing conditions, water source access, coverage requirements, and any site-specific constraints. You receive a formal assessment report. No obligation, no pressure to proceed.

System Design and Engineering

Our design team produces a full irrigation plan including zone layout, head placement, pipe routing, controller specification, and water pressure calculations. For large portfolios, we develop standardized design templates that can be adapted across multiple locations while maintaining consistent performance specifications. Design documentation is provided in a format compatible with your property records management system.

Permitting and Compliance Handling

Case manages the permitting process with the relevant municipal authority, including backflow prevention certification applications and any water usage reporting required by local ordinance. You do not need to navigate permit offices or track compliance deadlines. We handle it and provide completed documentation upon project close.

Installation

Our installation crews work to a defined project timeline with milestones you can track. For occupied properties, retail centres, medical campuses, we coordinate work schedules to minimize disruption to tenants, patients, and residents. All installation work is performed by licensed, insured technicians using commercial-grade materials specified for your system design.

System Testing and Commissioning

Before project handoff, every zone is tested for coverage uniformity, pressure consistency, and controller function. Any head adjustments, pressure corrections, or controller calibration are completed before the system goes live. You receive a complete system commissioning report.

Documentation and Handoff

Case provides a full project close-out package including as-built drawings, controller programming documentation, backflow test records, warranty terms, and maintenance schedule recommendations. For portfolio clients, documentation is formatted for integration with your centralized property management records.

Ongoing Maintenance Program

Installation is the starting point, not the finish line. Case offers multi-year irrigation maintenance agreements covering seasonal startup and shutdown, mid-season inspections, head replacements, controller updates, and emergency repair response. Clients who enter a maintenance program after installation receive priority scheduling and a dedicated account contact for all service coordination.

Commercial Irrigation Systems We Design and Install

Case installs systems appropriate for the property type, water source, and coverage requirement, not a single default specification applied across every site.

Spray and Rotor Systems

Fixed spray heads and rotary nozzles for turf coverage, entry corridors, and open green space. We specify head type, nozzle radius, and arc based on the zone dimensions and water pressure available at each site.

Drip Irrigation Systems

Low-volume drip emitters for planting beds, foundation landscaping, and areas where overspray onto hardscape or building facades must be avoided. Drip systems deliver water directly to plant root zones, reducing evaporation loss and eliminating the spray drift that causes staining on exterior building surfaces.

Smart Controller Installation

Case installs weather-based and ET (evapotranspiration) smart controllers that adjust run times based on real weather data, reducing water consumption without requiring manual schedule changes. For portfolio clients, we configure controllers for remote monitoring and adjustment, allowing your facilities team or our service technicians to modify scheduling across all sites without requiring an on-site visit.

Flow Monitoring and Leak Detection

Flow sensors installed at the mainline level detect abnormal water usage that may indicate a broken head, burst lateral line, or valve malfunction. When flow monitoring is active, a system malfunction triggers an alert before water waste accumulates into a significant water bill spike.

Backflow Prevention

Commercial irrigation systems require backflow preventers to protect the municipal water supply from potential contamination. Case installs backflow prevention assemblies appropriate for your system pressure and local code requirements, and we manage the annual testing and certification process on your behalf.

Central Control Platforms

For portfolio clients managing 10 or more sites, central control software allows your team, or our service team, to monitor system status, review water usage data, and push schedule changes across all locations from a single platform. We support integration with the central control platforms already in use at your organization, or we can recommend and configure a new platform appropriate for your portfolio size.

Pump Station Installation

Properties that draw from a lake, pond, retention basin, or well require a pump station to deliver adequate water pressure to the irrigation system. Case designs and installs pump stations appropriate for your water source volume and system demand.

What Makes Case Different for Large-Scale Commercial Irrigation

There are roughly 45,000 irrigation contractors operating in the United States. Most of them install residential systems and handle occasional commercial work on the side. Case is built specifically for commercial and institutional property portfolios.

Scale That Matches Your Operation

We service 35,000+ commercial locations across North America through a 25,000+ service partner network and 500+ trucks and equipment assets. When you need irrigation installation coordinated across 50 locations in 8 states, we have the operational infrastructure to execute it, without the schedule delays and communication gaps that come with managing multiple regional contractors.

Proprietary Technology Built In-House

Case operates a proprietary client platform that provides real-time visibility into service status, project progress, and work completion across your entire portfolio. Every location, every service event, accessible through one login.This is technology we built for ourselves, because the tools commercially available did not meet the reporting and visibility standards our enterprise clients require.

One Point of Contact Across Your Portfolio

Enterprise facility maintenance contracts managed through multiple regional vendors create accountability gaps. When a problem occurs, the question of which contractor owns the issue slows the resolution.

Case assigns a dedicated account manager to every portfolio client, one person who knows your properties, your standards, and your reporting requirements.

Vendor Consolidation

For organizations managing exterior facility services across multiple vendors, separate irrigation contractor, separate landscaping contractor, separate snow management contractor, Case offers the opportunity to consolidate under a single national partner.

We deliver landscaping, irrigation, snow and ice management, tree care, fertilization, pest control, and other exterior facility services across your portfolio under one MSA.

Irrigation Compliance for Commercial Properties

Irrigation compliance is not optional, and the liability for non-compliance sits with the property owner or manager, not the contractor who left without filing the paperwork.

Case handles compliance as a standard part of every installation project:

Backflow Prevention Installation and Annual Certification

We manage the testing schedule and keep records on file.

Municipal Permit Applications

We submit, track, and close permits for every installation project.

Water Usage Reporting

Where local ordinance requires water usage documentation, we provide it.

Cross-Connection Control Compliance

We verify your installation meets local water authority cross-connection requirements before project close.

Insurance Documentation

We provide certificates of insurance in the format required by your property ownership group or leasing agreement.

Commercial Irrigation Installation, Frequently Asked Questions

What size commercial properties does Case install irrigation systems for?

We work with commercial properties ranging from single-location office buildings to national portfolios of 300+ sites. Our installation process and project management structure are designed to scale across large, geographically distributed portfolios without loss of consistency or quality.

How long does a commercial irrigation installation take?

Timeline depends on system size, site conditions, and permitting requirements in the local jurisdiction. A typical single-site commercial installation is completed in 3-10 business days. Multi-site portfolio projects are phased across a mutually agreed schedule.

Do you handle permitting for commercial irrigation projects?

Yes. Case manages the permit application, tracking, and close-out for every installation project. We also manage backflow prevention certification and any water usage reporting required by local ordinance.

What brands and components do you install?

We specify commercial-grade components appropriate for each project, including Toro, Hunter, Rain Bird, and Weathermatic controllers and head assemblies. For portfolio clients, we can standardize on a preferred specification to maintain consistency across all locations.

Can Case take over irrigation maintenance after installation?

Yes, and we recommend it. Clients who enter a multi-year maintenance agreement after installation receive priority service scheduling, a dedicated account contact, and documented service history for every site in their portfolio.

What is the difference between drip irrigation and spray irrigation for commercial properties?

Spray irrigation uses rotating or fixed heads that distribute water across a wider area, appropriate for turf, open green space, and large planting beds. Drip irrigation delivers low-volume water directly to plant root zones through emitters, appropriate for foundation planting, small beds, and areas where overspray onto hardscape or building facades must be avoided. Most commercial installations use a combination of both system types.

How does smart irrigation reduce water costs for commercial properties?

Smart controllers adjust irrigation run times based on real-time weather data, eliminating unnecessary watering after rainfall and adjusting schedules during heat events without manual intervention. For a commercial property running irrigation across 8-15 zones, smart controller optimization typically produces 20-40% water savings compared to a fixed-schedule timer.

Does Case work with national account procurement teams?

Yes. We support formal procurement processes including RFP responses, vendor qualification documentation, master service agreement negotiation, and multi-site rollout planning. Contact our national accounts team directly to begin the qualification conversation.

What geographic areas does Case serve for commercial irrigation installation?

Case operates nationally through a 25,000+ service partner network. Contact us with your portfolio locations and we will confirm coverage and provide a service area map for your specific properties.

Is Case insured and licensed for commercial irrigation work?

Yes. Case carries full commercial general liability coverage and operates with the licensing required in each jurisdiction we serve. We provide certificates of insurance in the format required by your ownership group or property management company.

Ready to Install a Commercial Irrigation System That Performs Across Every Location?

Case provides free commercial site assessments for property managers, facility directors, and procurement teams evaluating irrigation installation for single sites or multi-location portfolios.

There is no obligation to proceed after the assessment. You receive a formal site report and a project proposal you can present to your ownership group, board, or procurement committee.